Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Mv Inspection , Diagnostic Check Car , Brake Tester , our merchandise have superior popularity from the whole world as its most competive cost and our most advantage of after-sale assistance for the clients。
Factory Free sample Chassis Dyno Testing - Loaded mode emission test system – Orient Detail:
Model:PROASM-9000® series
With loaded mode, PROASM-9000® performs vehicle emission test for diesel andgasoline engines.
PROASM900O® system meets BAR97 requirements and integrated with chassisdynamometer, gas analyzer, smoke meter, computer and other accessories.
With selection of system confin by customer themselves, they can useROASM9000® to test diesel one vehicle emissions or both in loaded.
PROASM900O® system awards National Gold Award of Innovation of EnvironmentProtection in China.
Main Testing Variables
OASM9000® tests vehicle emissions according to one testing mode or severalcombinations below thanks to up-to-date technology.
All functions selected would be implemented by selection of differentsub-assemblies. accessories and software modules
Funtion And Interface
Software Version G2, based on our team s experience over10 years, shows a great function of security, easymaintenance, friendly interface, compatibility, selfdiagnostics, etc.
The testing functions include testing procedure, selfdiagnostic procedure, dada management procedure andLAN function etc.
The functions can be initiated in despite of whatcombination of hardware selected by user. The controllingand management of a emission testing system can be doneafter setup easily.
The friendly interface makes operating easily.
All operation of calibration, audit and leakage are prompted
Operating in case of any failure happens can be solved andleaded by PC
The results are display in digit and curve as well.
Multi-language version available
Remote Management
Ability of communicate with a citysVehicle Emission control andManagement System or VID.
It is possible to monitor testing procedureby authority through internet. (optional).
All monitoring requirements can beimplemented by on-line module.
Auto Maintenance
Checking the HC residence and starting thepiping cleaning automatically.
Checking zero gas automatically(optional).
Zeroing sensors and checking sensorsstatus periodically.
Cleaning the piping every time before shutdown.
Warming up automatically
Chassis Dynamometer
Parameter |
Middle duty
|
Heavy duty
|
Twin axle
|
Model |
Ca-Dyno
|
Me-Dyno
|
Mh-Dyno/T
|
Axle load |
3,000
|
10,000
|
10,000
|
Roller diameter (mm) |
217
|
217
|
420
|
Roller spacing (mm) |
436
|
436
|
670/1350
|
Min. Track length (mm) |
760
|
750
|
780
|
Max. Track length (mm) |
2540
|
2710
|
2740
|
Max Power absorbed (KW) |
140-180
|
270-330
|
2X350
|
Max. Torque absorbed (Nm) |
1750
|
3300
|
2X3300
|
Motor Power (KW) |
5.5
|
7.5
|
15
|
Base inertia (kg) |
908
|
908
|
1460
|
Speed test range (km/h) |
120
|
Speed test accuracy (km/h) |
±0.2
|
Torque test accuracy |
2%
|
Drive |
PWM+GBT
|
Port |
RS232C
|
Dimision L×W×H(mm) |
3980X700X370
|
4300X1410X550
|
4800X2650X550
|
Gas Analvzer
Gas
|
Measuring Range
|
Resolution
|
Accuracy
|
HC
|
0-2000X10-6
2001-15000X10-6
1500130000X10-6
|
1X10-6
|
±4X10-6 abs or ±3%
±5%
±8%
|
CO
|
0.00-10%
10.01-15.00%
|
0.01%
|
±0.02% abs or ±3%
±5%
|
CO2
|
0.00-16%
16.01-20.00%
|
0.01%
|
±0.3% abs or ±3%
±5%
|
NO
|
0-4000×10-6
4001-5000x 10-6
|
1×10-6
|
±25X10-6 abs or ±4%
±5%
|
O2
|
0.00-25%
|
0.01%
|
±1% or ±3%
|
Gas Analvzer
Parameter |
Data
|
Measuring range |
N, 0~99.9% K,0~15/m
|
Resolution |
N, 0.1% K,0.01/m
|
Accuracy |
±2%
|
Stability |
±1%h
|
Working environment |
Temp. 5~40℃ Humidity 0~90% Baro 86~106kPa
|
Power supply |
AC220V±10%, 50Hz ±1%
|
Output |
RS232C (baud rate 1200,2400,4800,9600,19200)
|
Weight |
~13kg
|
Console
U3 console body, corrosion free surface by powder spray. |
Computer system |
Industrial PC, Plll 1GHZ or more, 128M memory, 40G hard driver, 10/100MEthemet Port. 17 color fat CRI. Laserjet A4. |
Communication Protocol |
TCP / IP |
Optional |
Tamper recognizing device |
Power supply |
220VAC 50HZ 2KW |
Air pressure |
10.6-0.9 MPa |
Operation temperature |
5-40°C |
Operation humidity |
< = 90 % ( No condense ) |
Dimension |
900X600X1050 mm |
Safety And Security
No possibility to use any other softwareunless permitted.
All data are saved with MD5 encoded toprevent illegal change.
Protection of un-allowed operations such as,the un-enough sampling length into the tailpipe, un-authorized operator, un-satisfiedcircumstance. etc.
All events will be logged.
Weather Station
Parameter |
Measuring Range
|
Accuracy
|
Temperature (°C) |
-25 -+85
|
±1.5
|
Humidity (RH) |
5%-99%
|
±3.0%
|
Air pressure (kpa) |
50-110
|
±3%
|
Product detail pictures:
Related Product Guide:
Our pursuit and corporation aim should be to "Always satisfy our consumer requirements". We carry on to build and style and design remarkable quality items for both our outdated and new clients and reach a win-win prospect for our clients at the same time as us for Factory Free sample Chassis Dyno Testing - Loaded mode emission test system – Orient, The product will supply to all over the world, such as: Juventus, Rwanda, Southampton, Our company always provides good quality and reasonable price for our customers. In our efforts, we already have many shops in Guangzhou and our products have won praise from customers worldwide. Our mission has always been simple: To delight our customers with best quality hair products and deliver on time. Welcome new and old customers to contact us for the future long term business relationships.