We persist with the principle of "quality 1st, assistance initially, continual improvement and innovation to meet the customers" for your management and "zero defect, zero complaints" as the standard objective. To great our service, we present the products and solutions while using the very good top quality at the reasonable cost for Two Wheeler Chassis Dynamometer , Complete Vehicle Inspection Cost , Car Mot Check , Our company warmly welcome friends from all over the world to visit, investigate and negotiate business.
Manufacturer for Eddy Current Dynamometer - Brake tester – Orient Detail:
BKR series roller brake tester is an up-to-date one to measure vehicles brakingperformance. During testing, the slip rate between wheel and roller is monitored todetermine the maximum brake force automatically. The testers driving motor would be shudown automatically either when testing finished or vehicle tested runing out of the tester inorder to protect tires very wel.
Ceramic roller surface makes the friction factor more than 0.6 either being we/dry to avoidthe tire damage.
All frames made with high-quality steel and galvanized or painting sprayed.
BKR can test either 2WD or 4WD vehicles with additional sub-assembly.
Function And Interface
Summary Results
Brake force per wheel N
Drag force per wheel N
brake force of hand braken N
Deceleration per axleor %or m/s2
Deceleration of whole vehicle %or m/s2
Imbalance per axle %
Round out of wheel %
Specifications
|
Items
|
BKR-3
|
BKR-10(15)
|
|
Axle load allowed(kg)
|
3000
|
10,000 (15,000)
|
|
Brake force range per wheel(N)
|
2X6,000
|
2X30,000 (2X40,000)
|
|
Roller diameter(mm)
|
200
|
245
|
|
Roller lateral spacing(mm)
|
380
|
445
|
|
Testing speed(km/h)
|
2.2
|
2.3
|
|
Track distance Min(mm)
|
900
|
950
|
|
Track distance Max(mm)
|
1800
|
2600
|
|
Roller set dimension(mm)
|
239X725X375
|
4200X980X520
|
|
Accuracy
|
±%3F.S.
|
±%3F.S.
|
|
Drive motor(kw)
|
2X2.2
|
2X11 (2X15)
|
|
Operation temperature(°c)
|
5-40
|
|
Roller surface
|
Cramic coating
|
|
Weight(kg)
|
950
|
1800 (1850)
|
Control Center
| U3 console body |
Corrosion free surface by powder Spray, moving foots |
| Computer system |
Industrial PC, Intel Core 2,
2G Memory, 1T HardDisk,
10/100M Ethernet Port, 19’LCD,
Laster jet A4 |
| Net-working |
TCP/IP |
| Compress air supply |
0.6～0.9 MPa |
| Power supply |
220VAC 50Hz kW |
| Operation tempe rature |
5～40℃ |
| Operation humidity |
≤90% |
| Dimension |
900×600×1100mm |
| *Note: Other specification of power supply is available on request. |
Optional Kit
Weighting device
Kit: W-3, W-10
With W series weighting device to get brakeacceleration value automatically.
4 WD additional roller kit
Kit: R-3. R-10
This kit perform the AWD car test withadditional roller set
Product detail pictures:
Related Product Guide:
To become the stage of realizing dreams of our employees! To build a happier, much more united and far more professional team! To reach a mutual profit of our clients, suppliers, the society and ourselves for Manufacturer for Eddy Current Dynamometer - Brake tester – Orient, The product will supply to all over the world, such as: Brisbane, Cologne, Czech Republic, At Present, our merchandise have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
